Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

Changing design rule.

509 8

pommie 3 years ago

I am routing a board that had the power rails set to a width of 0.6mm. As I've added a QFN chip I had to reduce these to 0.4mm. I did it here, ![design.png](//image.easyeda.com/pullimage/c6RKt1xmpQuS5rhNejb3hG3xyW7lHJgcijYlcjIY.png) Note, the "Apply Design Rule while routing" is checked. However, when I try to route a power trace it maintains the 0.6mm width. ![design2.png](//image.easyeda.com/pullimage/R3pmd1rVky2qOHYK6yFMZ0X3KSdkIXtr9AwCoIMi.png) How do I change this? Mike.

Chrome 91.0.4472.164 Windows 7 EasyEDA 6.4.20.6

Comments

UserSupport 3 years ago

You need to exit drawing track mode, and redraw this net, as your image , I belive the track width is 0.4mm, the right-panel will not change, it is for your modify track width, when you routing, the track width will follow the design rule first [https://docs.easyeda.com/en/PCB/Route/index.html](https://docs.easyeda.com/en/PCB/Route/index.html)

Firefox 90.0 Windows 10 EasyEDA 6.4.20.6

pommie 3 years ago

Even when I made the track width 0.3mm - the same as the other routed traces, it still will not connect to any pad. I still see the second image above without any track. Mike.

Chrome 91.0.4472.164 Windows 7 EasyEDA 6.4.20.6

andyfierman 3 years ago

@pommie, Please take some time to study the Tutorial: [https://docs.easyeda.com/en/PCB/Route/index.html#Route-Tracks](https://docs.easyeda.com/en/PCB/Route/index.html#Route-Tracks)<br> <br> and these animated gif videos: ![deepin-screen-recorder_Select area_20210730131559.gif](//image.easyeda.com/pullimage/jwmr2ByGnlvLo4MZmnFILNN86yaMPgRBa7hQVFq8.gif) ![deepin-screen-recorder_Select area_20210730132541.gif](//image.easyeda.com/pullimage/nUg55ACoNyUXt9rP7hqBCB53ey1yfLYjhECeHxvy.gif)

Chrome 91.0.4472.114 Linux EasyEDA 6.4.20.6

pommie 3 years ago

> Please take some time to study the Tutorial: Please do me the courtesy of reading my post. This constant RTFM response is ridiculous. Mike.

Chrome 91.0.4472.164 Windows 7 EasyEDA 6.4.20.6

andyfierman 3 years ago

@pommie, Sorry but I can only reproduce the behaviour that you describe in your initial post if the "Apply Design Rule while routing" tick box is **not** checked.

Chrome 91.0.4472.114 Linux EasyEDA 6.4.20.6

pommie 3 years ago

I stand by what I posted above.

Chrome 91.0.4472.164 Windows 7 EasyEDA 6.4.20.6

andyfierman 3 years ago

Given that I cannot reproduce the behaviour you are seeing with the settingsthat you describe, can you post an animated gif showing your settings and exactly the steps you are taking to produce the behaviour you are reporting?

Chrome 91.0.4472.101 AndroidOS 10 EasyEDA 6.4.20.6

pommie 3 years ago

I've just tried to reproduce it but can't. However, the other day it definitely would't let me route the trace. Mike.

Chrome 91.0.4472.164 Windows 7 EasyEDA 6.4.20.6

你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
联系我们：https://docs.lceda.cn/cn/FAQ/Contact-Us/index.html不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice