Using the Circle or Arc tools, make 3 circular tracks; Place small Solid Regions set to No Solid at each of the breaks in the tracks; Add small multi-layer pad or via pairs to tracks ending in multi-layer pads on the underside as required. You will probably get a lot of DRC errors from the PCB Design Manager but check them all carefully and ignore the ones that you identify as not causing a problem. You could use a photograph imported into the Document or Mechanical layer as a template over which to draw your traces and gaps but if you have accurate measurements of the original PCB then that may not help very much. For more on using an image as a template, see: [https://easyeda.com/forum/topic/Import-bitmap-for-pcb-design-92da4e82a15f4beeaed144293d925524](https://easyeda.com/forum/topic/Import-bitmap-for-pcb-design-92da4e82a15f4beeaed144293d925524)<br> <br> and the links it points to.

Get your PCB made by JLCPCB with an ENIG finish.